EVO Orange Moderate Cut Foam Polishing Pad

Moderate Cut 1500
$12.95
In stock
SKU
PAD-ORG
Options

Why Use EVO Moderate Cut

Our EVO Moderate Cut Orange Foam Polishing Pad was specifically built to meet the needs of the most demanding detailers, body shops, and even European assembly lines.

  • Our Evo Orange Moderate Cut Foam Ploishing Pad will easily remove 1500 grit sand scratches, car wash scratches, towel marks and light swirls caused from hi-speed buffing.
  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

Our EVO Moderate Cut Orange Foam Polishing Pad was specifically built to meet the needs of the most demanding detailers, body shops, and even European assembly lines. Originally designed for rotary polishers to correct RDS and swirls left behind by wool pads. We have found our EVO Moderate Cut Orange Foam Polishing Pad to not only correct those imperfections but also leave the finish crystal clear.

The EVO Orange Moderate Cut Foam Polishing Pad will easily remove 1500 grit sand scratches, car wash scratches, towel marks and light swirls caused from hi-speed buffing.

Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

More Information
Short Description Moderate Cut 1500
why

Why Use EVO Moderate Cut

Our EVO Moderate Cut Orange Foam Polishing Pad was specifically built to meet the needs of the most demanding detailers, body shops, and even European assembly lines.

  • Our Evo Orange Moderate Cut Foam Ploishing Pad will easily remove 1500 grit sand scratches, car wash scratches, towel marks and light swirls caused from hi-speed buffing.
  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!
How to use

MACHINE APPLICATION:

  • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
  • Shake EVO Cut Polish 1500 well and apply several pea-sized beads on a color matched EVO Orange Moderate Cut Foam Polishing Pad.
  • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
  • Working in a 2’ by 2’ area, increase machine speed to 5 or 6. Polish in a cross hatch pattern overlapping with each pass while applying 10 to 15 lbs. of pressure to allow EVO Cut Polish 1500 to effectively remove paint imperfections. Polish area until product is no longer visible and defects are removed. If imperfections persist repeat process until desired results are achieved or step up to the EVO Cut Plus Polish 1000 for more aggressive defect removal.
  • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
  • Once satisfied with correction results, proceed to finishing steps using EVO Cut Finish Polish 2000 with an EVO Yellow Light Cut Foam Polishing Pad then use EVO Ultra Finish Polish 3000 with EVO Blue Final Finishing Foam Pad.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!

Color No
Detail Spray Size 22oz
Size No
Polishing Pad Size N/A
Brush Size No
Cleaning Gel Size No
Microfiber Suede Applicator Block Amount N/A
Tire Gloss Size No
Sealant Glaze Size No
Protectant Size No
Masking Tape Size N/A
Microfiber Drying Towel Size No
Polish Size No
Microfiber Towel Options No
Gloss Envy Detail Spray Plus Size No
Microfiber Detailing Towel Size No
Glass Cleaner Size No
EVO 21 Random Orbit Dual Action Polisher Options No
Buffing Pads and Applicators No
Enhancer Detail Spray Size 22 Ounce
Gloss Enhancing Car Wash Shampoo Size No
Backing Plate Size No
Detailing Clay Bar Option No
Applicator Size No
Protection N/A
Cleaner Concentrate Size No
Write Your Own Review
You're reviewing:EVO Orange Moderate Cut Foam Polishing Pad
Your Rating

MACHINE APPLICATION:

  • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
  • Shake EVO Cut Polish 1500 well and apply several pea-sized beads on a color matched EVO Orange Moderate Cut Foam Polishing Pad.
  • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
  • Working in a 2’ by 2’ area, increase machine speed to 5 or 6. Polish in a cross hatch pattern overlapping with each pass while applying 10 to 15 lbs. of pressure to allow EVO Cut Polish 1500 to effectively remove paint imperfections. Polish area until product is no longer visible and defects are removed. If imperfections persist repeat process until desired results are achieved or step up to the EVO Cut Plus Polish 1000 for more aggressive defect removal.
  • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
  • Once satisfied with correction results, proceed to finishing steps using EVO Cut Finish Polish 2000 with an EVO Yellow Light Cut Foam Polishing Pad then use EVO Ultra Finish Polish 3000 with EVO Blue Final Finishing Foam Pad.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!

We found other products you might like!