EVO White Fast Cut Foam Polishing Pad

Heavy Cut 1000
$12.95
In stock
SKU
PAD-WHT
Options

Why Use EVO 6 inch White Fast

Gloss-It EVO White Fast Cut Foam Polishing Pad is an aggressive heavy cut pad that will remove deeper scratches, serious swirl marks and heavy oxidation when used in conjunction with EVO Cut Plus Polish 1000

  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

Gloss-It EVO White Fast Cut Foam Polishing Pad is an aggressive heavy cut pad that will remove deeper scratches, serious swirl marks and heavy oxidation when used in conjunction with EVO Cut Plus Polish 1000.

Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

More Information
Short Description Heavy Cut 1000
why

Why Use EVO 6 inch White Fast

Gloss-It EVO White Fast Cut Foam Polishing Pad is an aggressive heavy cut pad that will remove deeper scratches, serious swirl marks and heavy oxidation when used in conjunction with EVO Cut Plus Polish 1000

  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!
How to use

MACHINE POLISHING INSTRUCTIONS:

Recommended Machine: Gloss-It EVO 21 Dual Action Polisher

  • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
  • Shake EVO Cut Plus Polish 1000 well and apply several pea- sized beads on a color matched EVO Grey Heavy Cut Wool Pad. You may instead use our less aggressive EVO White Fast Cut Foam Polishing Pad if desired for softer finishes.
  • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
  • Working in a 2’ by 2’ area, increase machine speed to 5 or 6. Polish in a cross hatch pattern overlapping with each pass while applying 15 lbs. of pressure to allow EVO Cut Plus 1000 to effectively remove paint imperfections. Polish area until product is no longer visible and defects are removed. If imperfections persist repeat process until desired results are achieved.
  • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
  • Once satisfied with correction results, proceed to finishing steps using EVO Cut Polish 1500 with a EVO Moderate Cut Orange Foam Polishing Pad followed by EVO Cut Finish Polish 2000 with an EVO Yellow Light Cut Foam Polishing Pad and if desired EVO Ultra Finish Polish 3000 with an EVO Blue Final Finishing Foam Pad.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!

Color No
Detail Spray Size 22oz
Size No
Polishing Pad Size N/A
Brush Size No
Cleaning Gel Size No
Microfiber Suede Applicator Block Amount N/A
Tire Gloss Size No
Sealant Glaze Size No
Protectant Size No
Masking Tape Size N/A
Microfiber Drying Towel Size No
Polish Size No
Microfiber Towel Options No
Gloss Envy Detail Spray Plus Size No
Microfiber Detailing Towel Size No
Glass Cleaner Size No
EVO 21 Random Orbit Dual Action Polisher Options No
Buffing Pads and Applicators No
Enhancer Detail Spray Size 22 Ounce
Gloss Enhancing Car Wash Shampoo Size No
Backing Plate Size No
Detailing Clay Bar Option No
Applicator Size No
Protection N/A
Cleaner Concentrate Size No
Write Your Own Review
You're reviewing:EVO White Fast Cut Foam Polishing Pad
Your Rating

MACHINE POLISHING INSTRUCTIONS:

Recommended Machine: Gloss-It EVO 21 Dual Action Polisher

  • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
  • Shake EVO Cut Plus Polish 1000 well and apply several pea- sized beads on a color matched EVO Grey Heavy Cut Wool Pad. You may instead use our less aggressive EVO White Fast Cut Foam Polishing Pad if desired for softer finishes.
  • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
  • Working in a 2’ by 2’ area, increase machine speed to 5 or 6. Polish in a cross hatch pattern overlapping with each pass while applying 15 lbs. of pressure to allow EVO Cut Plus 1000 to effectively remove paint imperfections. Polish area until product is no longer visible and defects are removed. If imperfections persist repeat process until desired results are achieved.
  • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
  • Once satisfied with correction results, proceed to finishing steps using EVO Cut Polish 1500 with a EVO Moderate Cut Orange Foam Polishing Pad followed by EVO Cut Finish Polish 2000 with an EVO Yellow Light Cut Foam Polishing Pad and if desired EVO Ultra Finish Polish 3000 with an EVO Blue Final Finishing Foam Pad.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!