EVO Yellow Light Cut Foam Polishing Pad

Light Cut 2000
$14.95
In stock
SKU
PAD-YLO
Options

Why Use EVO Yellow Light

Our Gloss-It EVO Yellow Light Cut Foam Polishing Pad is a light cut pad that will effectively remove swirl-marks, micro marring and residual pig tails when used in conjunction with EVO Cut Finish Polish 2000. This is the perfect finishing polish and pad combination after heavy cutting with our EVO Cut Plus Polish 1000 or EVO Cut Polish 1500.

  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

Our Gloss-It EVO Yellow Light Cut Foam Polishing Pad is a light cut pad that will effectively remove swirl-marks, micro marring and residual pig tails when used in conjunction with EVO Cut Finish Polish 2000. This is the perfect finishing polish and pad combination after heavy cutting with our EVO Cut Plus Polish 1000 or EVO Cut Polish 1500.

Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!

More Information
Short Description Light Cut 2000
why

Why Use EVO Yellow Light

Our Gloss-It EVO Yellow Light Cut Foam Polishing Pad is a light cut pad that will effectively remove swirl-marks, micro marring and residual pig tails when used in conjunction with EVO Cut Finish Polish 2000. This is the perfect finishing polish and pad combination after heavy cutting with our EVO Cut Plus Polish 1000 or EVO Cut Polish 1500.

  • Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less!
How to use

MACHINE POLISHING INSTRUCTIONS:

Recommended Machine: Gloss-It EVO 21 Dual Action Polisher

    • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
    • Shake EVO Cut Finish 2000 well and apply several pea-sized beads on a color matched EVO Yellow Light Cut Foam Polishing Pad. For softer or easily marred clear coats you may use our less aggressive EVO Blue Final Finishing Foam Pad.
    • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
    • Working in a 2’ by 2’ area, increase machine speed to 4 or 5. Using light to moderate pressure polish in a cross hatch pattern overlapping with each pass to allow EVO Cut Finish 2000 to effectively remove paint imperfections. If imperfections persist repeat process until desired results are achieved or step up to the EVO Cut 1500 for more aggressive defect removal.
    • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
    • If desired use EVO Ultra Finish 3000 with an EVO Blue Final Finishing Foam Pad. Once optimal results are achieved, proceed BY applying one of our Gloss-It Signature Series Paste Waxes, Gloss-It Gloss Finish Sealant or Gloss-It Concorso Gloss Finish Sealant Glaze for depth in shine and durable protection.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!

Color No
Detail Spray Size 22oz
Size No
Polishing Pad Size N/A
Brush Size No
Cleaning Gel Size No
Microfiber Suede Applicator Block Amount N/A
Tire Gloss Size No
Sealant Glaze Size No
Protectant Size No
Masking Tape Size N/A
Microfiber Drying Towel Size No
Polish Size No
Microfiber Towel Options No
Gloss Envy Detail Spray Plus Size No
Microfiber Detailing Towel Size No
Glass Cleaner Size No
EVO 21 Random Orbit Dual Action Polisher Options No
Buffing Pads and Applicators No
Enhancer Detail Spray Size 22 Ounce
Gloss Enhancing Car Wash Shampoo Size No
Backing Plate Size No
Detailing Clay Bar Option No
Applicator Size No
Protection N/A
Cleaner Concentrate Size No
Write Your Own Review
You're reviewing:EVO Yellow Light Cut Foam Polishing Pad
Your Rating

MACHINE POLISHING INSTRUCTIONS:

Recommended Machine: Gloss-It EVO 21 Dual Action Polisher

    • Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray.
    • Shake EVO Cut Finish 2000 well and apply several pea-sized beads on a color matched EVO Yellow Light Cut Foam Polishing Pad. For softer or easily marred clear coats you may use our less aggressive EVO Blue Final Finishing Foam Pad.
    • Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging.
    • Working in a 2’ by 2’ area, increase machine speed to 4 or 5. Using light to moderate pressure polish in a cross hatch pattern overlapping with each pass to allow EVO Cut Finish 2000 to effectively remove paint imperfections. If imperfections persist repeat process until desired results are achieved or step up to the EVO Cut 1500 for more aggressive defect removal.
    • Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight.
    • If desired use EVO Ultra Finish 3000 with an EVO Blue Final Finishing Foam Pad. Once optimal results are achieved, proceed BY applying one of our Gloss-It Signature Series Paste Waxes, Gloss-It Gloss Finish Sealant or Gloss-It Concorso Gloss Finish Sealant Glaze for depth in shine and durable protection.

Check our our Gloss-It Online Educational Detailing Videos for more in depth information!