Buy 1 Gloss It Foam Canon 1 Gal Shampoo Refill Bundle, and Save $10 with combined purchase.
$234.95
In stock
SKU
FC1GB

Why Use Foam Cannon Refill

Gloss it has team up with the guys over at MTM to offer the latest in touch less car washing with our gloss shampoo and this awesome foam gun cannon that works in conjunction with a pressure washer for un palled washing experience.

  • Car wash soap, water, and air to create thick clinging foam
  • Saturate dirt and debris to reduce chances of swirls and scratches

Gloss it has team up with the guys over at MTM to offer the latest in touch less car washing with our gloss shampoo and this awesome foam gun cannon that works in conjunction with a pressure washer for un palled washing experience. Whether your a professional or DIY this bundle kit will be for sure your go system for the best car wash shine!

Stay tune for our upcoming new gloss it garage tutorial videos using this foam cannon system!

Features:
• Sprays thick car wash foam over any vehicle
• car wash soap, water, and air to create thick clinging foam
• Saturate dirt and debris to reduce chances of swirls and scratches
• paintwork by lubricating and gently removing abrasive dirt and debris
• 1,100-5,000 PSI operating pressures
• 1.8-5.3 gallon/minute pressure washer compatibility
• Up to 140℉ water injection
• Adjustable spray pattern (horizontal or vertical) with a twist of the wrist
• Adjustable foam fan from narrow to extra-wide
• Approved for auto, RV, agriculture, home, and marine detailing and cleaning
• Universal pressure washer fittings attach to any pressure washer

Tech Specs:
• New Two Stage Nozzle Sprays up to 20 feet
• Adjustable Spray Pattern (horizontal or vertical)
• Adjustable Fan Blades (jet-wide)
• New Ergonomic easy grip bottle
• Adjustable chemical injection knob
• Universal pressure washer Fittings attach to any pressure washer
• 1,100 - 5,000 psi operating pressures
• 1.8 - 5.3 gallon/minute pressure washer compatibility
• Adjustable spray pattern (horizontal or vertical) with a twist of the wrist
• Approved for Auto, RV, agriculture, home, and marine Detailing and cleaning

Gloss-It Gloss Enhancing Car Wash Shampoo is formulated with the same Nano Synthetic Advanced Polymer (NASP) that is in our Gloss-It Gloss Finish Paint Sealant. This polymer increases washing lubricity, encapsulating loosened grit to reduce car wash swirls.

Gloss-It Gloss Enhancing Car Wash Shampoo is pH balanced and is guaranteed to not strip your wax or paint sealant.

Our Gloss-It Gloss Enhancing Car Wash Shampoo is highly concentrated so it takes just one cap full per 3 gallons of clean water.

More Information
Short Description Buy 1 Gloss It Foam Canon 1 Gal Shampoo Refill Bundle, and Save $10 with combined purchase.
why

Why Use Foam Cannon Refill

Gloss it has team up with the guys over at MTM to offer the latest in touch less car washing with our gloss shampoo and this awesome foam gun cannon that works in conjunction with a pressure washer for un palled washing experience.

  • Car wash soap, water, and air to create thick clinging foam
  • Saturate dirt and debris to reduce chances of swirls and scratches
How to use

How To Use:

  1. Fill soap solution bottle with fresh water
  2. Add 1 - 3 oz of your favorite gloss shampoo gloss ehancing car wash soap
  3. Rinse car with water to remove loose debris and grime
  4. Reattach bottle and attach MTM PF22 Foam Lance to pressure washer wand
  5. Cover car with thick car wash foam to lift and lubricate stuck-on dirt from the surface
  6. Proceed with 2-bucket car wash method to gently remove any dirt without installing any swirls or scratches
  7. Rinse car clean, then dry with premium microfiber towels
  8. Maintaining The MTM PF22 Professional Foam Lance
  9. Rinse soap solution bottle clean with fresh water
  10. Run plain water through the foam cannon under pressure to purge detergent and soap from the internal components
  11. Cycle with warm or hot water to break down thick soap residues
  12. Unscrew soap solution bottle and allow to air dry, then reattach before storing
    Store the MTM PF22 Foam Lance in a cool dry place out of direct sunlight
Color No
Detail Spray Size 22oz
Size No
Polishing Pad Size No
Brush Size No
Cleaning Gel Size No
Microfiber Suede Applicator Block Amount N/A
Tire Gloss Size No
Sealant Glaze Size No
Protectant Size No
Masking Tape Size N/A
Microfiber Drying Towel Size No
Polish Size No
Microfiber Towel Options No
Gloss Envy Detail Spray Plus Size No
Microfiber Detailing Towel Size No
Glass Cleaner Size No
EVO 21 Random Orbit Dual Action Polisher Options No
Buffing Pads and Applicators No
Enhancer Detail Spray Size No
Gloss Enhancing Car Wash Shampoo Size No
Backing Plate Size No
Detailing Clay Bar Option No
Applicator Size No
Protection No
Cleaner Concentrate Size No
Write Your Own Review
You're reviewing:Foam Cannon 1 Gallon Refill Bundle
Your Rating

How To Use:

  1. Fill soap solution bottle with fresh water
  2. Add 1 - 3 oz of your favorite gloss shampoo gloss ehancing car wash soap
  3. Rinse car with water to remove loose debris and grime
  4. Reattach bottle and attach MTM PF22 Foam Lance to pressure washer wand
  5. Cover car with thick car wash foam to lift and lubricate stuck-on dirt from the surface
  6. Proceed with 2-bucket car wash method to gently remove any dirt without installing any swirls or scratches
  7. Rinse car clean, then dry with premium microfiber towels
  8. Maintaining The MTM PF22 Professional Foam Lance
  9. Rinse soap solution bottle clean with fresh water
  10. Run plain water through the foam cannon under pressure to purge detergent and soap from the internal components
  11. Cycle with warm or hot water to break down thick soap residues
  12. Unscrew soap solution bottle and allow to air dry, then reattach before storing
    Store the MTM PF22 Foam Lance in a cool dry place out of direct sunlight